Tuesday, October 23, 2007
Coke can stove test
I decided to do the classic 2 cup of water boil time test with that backpacking stove I made out of two coke cans. Using my swiss tool I bent a coat hanger into a little ultralight stand. Of course, if you really wanted to save weight you could just dig a small hole or use sticks or rocks to hold your pot over the stove. I'm pretty happy with the stove as it performed coming to a boil in rougly 4 minutes. :) The can of fuel was about $5 at the local Home Depot, it burns clean and fairly hot. I recorded a small 1 minute video as well after the stove had been on for about 3 minutes. The coat hanger worked fairly well, if I was going to keep it for actual use I'd sand off the paint on it, but I suspect I'll just use rocks or sticks in the field.
Part way into the video you'll see me stick my hand in there, showing the time at about 3min after starting the fire. All in all it averaged to almost exactly 4 minutes. I should also note that I'm probably only about 100ft above sea level.
Labels: backpacking, DIY, gear, outdoor
PermaLink / Posted by: Tony


